Loading

Male figma whose upper and bottom torso can be separated?

So, I'm searching for bottom torso (tbh I'm not sure if it's called torso or not, but anyway, hips and below) of male figma with normal black pants, and normal shoes, can be any color. For example, bottom torso like Figma Kiritsugu (ITEM #88082), Narukami Yu (ITEM #236211), Izaya (ITEM #331498), etc. But not something like Haruka's (ITEM #182298) or Makoto's, because it's swimsuit.

The thing is, is there any of them whose torso can be parted? I mean, you can part the upper body and lower body, and maybe, swap it with others' upper torso.

Any recommendations which figma would be suitable?
964 vues • 9 commentaires

Commentaires9 commentaires

Commentaires intéressants
20pt
"bottom torso" is commonly called "legs"
Torso is by definition the upper body lol.
Il y a 6 mois
Commentaires récents
1pt
monkry (Il y a 6 mois) #20125234Aaaa I see I see. Very satisfying. Thank you very very much, you're such a big help! :)
I'll mark this as solved.

No problem.
Good luck with whatever it is you're planning.
Il y a 6 mois
0pt
Coffee (Il y a 6 mois) #20123199No, none of the ones I've handled have been glued.
I just don't think you're supposed to take them apart at the waist since most figmas doesn't have extra parts that require you to take them apart that much.
Here's a photo: i.imgur.com/4Gu...


Aaaa I see I see. Very satisfying. Thank you very very much, you're such a big help! :)

I'll mark this as solved.
Il y a 6 mois
1pt
monkry (Il y a 6 mois) #20121869Hmm seems like the risk quite high... ONe more question please hehe X) Do you know whether the body joint was connected with or without glue? Maybe just, veeery fit (?), thus hard to separate them?
No, none of the ones I've handled have been glued.
I just don't think you're supposed to take them apart at the waist since most figmas doesn't have extra parts that require you to take them apart that much.
Here's a photo: i.imgur.com/4Gu...
Il y a 6 mois
0pt
Coffee (Il y a 6 mois) #20121449Ah ok, good to be of some help at least.
And I don't really remember which ones.
Most likely ITEM #233765 because he needed some adjustment
ITEM #117917 Fell apart and is now impossible to put together in a way that keeps the parts attached to each other
ITEM #98865 Pretty sure this was the first figma I took apart
ITEM #35893 Had to remove the jacket a bit to fix paint issues.
I think those are the ones I've pulled apart at the waist.


Hmm seems like the risk quite high... ONe more question please hehe X) Do you know whether the body joint was connected with or without glue? Maybe just, veeery fit (?), thus hard to separate them?
Il y a 6 mois
1pt
monkry (Il y a 6 mois) #20105571Nah, this answer my first questions, thank you very much! :) I see, I really forget about the different body size :( may I ask what figma you've tried to separate?
Ah ok, good to be of some help at least.

And I don't really remember which ones.
Most likely ITEM #233765 because he needed some adjustment
ITEM #117917 Fell apart and is now impossible to put together in a way that keeps the parts attached to each other
ITEM #98865 Pretty sure this was the first figma I took apart
ITEM #35893 Had to remove the jacket a bit to fix paint issues.

I think those are the ones I've pulled apart at the waist.
Il y a 6 mois
0pt
Coffee (Il y a 6 mois) #20102329Most figmas have a joint right above the hip-line (?).
It's not impossible to separate the parts, but at least in my cases, it has been easier said than done and sometimes it have resulted in the joint becoming loose after putting the figma back together.
The few figmas I've pulled apart have had more or less the same kind of joint, so as long as the figmas are of sort of the same size and what not, putting two different figmas together shouldn't be impossible.
And if this wasn't what you were asking, just ignore this message.


Nah, this answer my first questions, thank you very much! :) I see, I really forget about the different body size :( may I ask what figma you've tried to separate?
Il y a 6 mois
2pt
Most figmas have a joint right above the hip-line (?).
It's not impossible to separate the parts, but at least in my cases, it has been easier said than done and sometimes it have resulted in the joint becoming loose after putting the figma back together.
The few figmas I've pulled apart have had more or less the same kind of joint, so as long as the figmas are of sort of the same size and what not, putting two different figmas together shouldn't be impossible.

And if this wasn't what you were asking, just ignore this message.
Il y a 6 mois
1pt
I think they mean they are looking for figures with upper body ( from neck to abdomen ) and pelvic + legs that can be parted & switch with other figures
Il y a 6 mois
Anime, Figures and Manga For Less!

À propos de ce blog

 

Plus par monkryVoir tou(te)s

Items Liés 0

Tags0

Clubs Liés 0