Take care of your figures!Take care of your figures!Learn how to take care of your collection with your mates!

Ilvias
adorable little doll
Regular Boarder

Ilvias

En ligne Non
Niveau 17
Inscrit(e) Il y a 8 ans
Message(s) 133
Localisation Italy

Il y a 7 ans
Yeah, today we will talk about how to wash your figures properly and what kind of products you can use on them!

I usually wash my PVC/ABS figures once a year with simple water; if some of them have some smudges or similar I use a soft sponge without any kind of soap (I'm afraid to remove the paint!).
May PVC and love be always with you! (alpacas will make you happy too... Believe me!)
  #175372

RakkaKaze
Regular Boarder

RakkaKaze

En ligne Non
Niveau 11
Inscrit(e) Il y a 7 ans
Message(s) 24
Localisation United St...

Il y a 7 ans
I'm curious, what would the effectiveness of computer safe "Airwash" cans be?
http://img.photobucket.com/albums/v446/RakkaKaze/RakkaKaze.png
I am Me.
  #175512

Osasaki
Homu Homu
Regular Boarder

Osasaki

En ligne Non
Niveau 15
Inscrit(e) Il y a 8 ans
Message(s) 252
Localisation Canada

Il y a 7 ans
Pretty sure the paint used by most makers is sturdy enough to resist water washing......unless you use boiling hot water wich could warp the pvc as well :p

I occasionally have to wash whit water my Saber armored figma since she seem to attract a very greasy substance on herself all the time (doesnt happen to any other of my figs o.o) and i have to use warm water, so far no paint washed off.


As for airwash cans, one of my friend uses that and it works wonders i hear (im too cheap to buy one of those x3)
http://myfigurecollection.net/profile/Osasaki/sign.png
  #175595

kilani
Sayaka Rank
Administrator + Puella Magi

kilani

En ligne Non
Niveau 36
Inscrit(e) Il y a 8 ans
Message(s) 5434
Localisation United St...

Il y a 7 ans
RakkaKazeI'm curious, what would the effectiveness of computer safe "Airwash" cans be?

You mean compressed air cans? I've heard this is a very bad idea before and can damage your figures. I'd stay away from it.

I know one user just twirls his figures around in water, I'd prefer to wash my figures like that XD Dusting takes forever.

Also, be careful with washing figures that have screws in them like action figures, since you don't want to rust the screws or wear them down. I think it would be a bad idea to put it in a fridge or freezer to relieve the problem with Saber for that reason.
https://lh6.googleusercontent.com/-N8qnyiXA8bQ/T5j5J8_2h5I/AAAAAAAACOo/GkYMx2PBlrE/s365/hanekawa_01_websnap16p.gifhttps://lh6.googleusercontent.com/-6wUxtdQRF7s/T6XnI1JllMI/AAAAAAAACRU/8z9j-nQXegs/s400/hanekawa_02d.gifhttps://lh5.googleusercontent.com/-Ek8D9dEqt_4/T5mFnKWLOtI/AAAAAAAACPQ/l02cExv9aHc/s150/hanekawa_03.gif
MàJ Il y a 7 ans #175726

R_Kasahara
( =₃=)*
Very Important Boarder

R_Kasahara

En ligne Non
Niveau 26
Inscrit(e) Il y a 9 ans
Message(s) 1823
Localisation Bay Area,...

Il y a 7 ans
kilaniRakkaKazeI'm curious, what would the effectiveness of computer safe "Airwash" cans be?

You mean compressed air cans? I've heard this is a very bad idea before and can damage your figures. I'd stay away from it.

How so?

I typically use compressed air for hard-to-reach places (cotton swabs are good for this, too), and a combo of compressed air and anti-static cloths (or just plain old tissues) for general dusting. For smudges, I find that plasticy white erasers like the Sanford Magic Rub ones work wonders.
MàJ Il y a 7 ans #176082

nemophobia
Very Important Boarder

nemophobia

En ligne Non
Niveau 16
Inscrit(e) Il y a 8 ans
Message(s) 147
Localisation Italy

Il y a 7 ans
kilaniRakkaKazeI'm curious, what would the effectiveness of computer safe "Airwash" cans be?

You mean compressed air cans? I've heard this is a very bad idea before and can damage your figures. I'd stay away from it.


i usually use that and i've never had a problem.
i also use some soft (and cheap) makeup brush. i've never used wather....
http://i566.photobucket.com/albums/ss106/nemophobia_2009/iefgi8-1.jpg

VISIT MY BLOG
  #177705

kilani
Sayaka Rank
Administrator + Puella Magi

kilani

En ligne Non
Niveau 36
Inscrit(e) Il y a 8 ans
Message(s) 5434
Localisation United St...

Il y a 7 ans
R_Kasahara
I typically use compressed air for hard-to-reach places (cotton swabs are good for this, too), and a combo of compressed air and anti-static cloths (or just plain old tissues) for general dusting. For smudges, I find that plasticy white erasers like the Sanford Magic Rub ones work wonders.


I honestly wish I could remember, but it was 5 or so years ago and I have a really poor memory. Unfortunately the forum is defunct as well.
https://lh6.googleusercontent.com/-N8qnyiXA8bQ/T5j5J8_2h5I/AAAAAAAACOo/GkYMx2PBlrE/s365/hanekawa_01_websnap16p.gifhttps://lh6.googleusercontent.com/-6wUxtdQRF7s/T6XnI1JllMI/AAAAAAAACRU/8z9j-nQXegs/s400/hanekawa_02d.gifhttps://lh5.googleusercontent.com/-Ek8D9dEqt_4/T5mFnKWLOtI/AAAAAAAACPQ/l02cExv9aHc/s150/hanekawa_03.gif
  #177849

raetehytan
Regular Boarder

raetehytan

En ligne Non
Niveau 13
Inscrit(e) Il y a 7 ans
Message(s) 133
Localisation chicago, ...

Il y a 7 ans
If you don't hold the can at a 90 degree angle, you'll see a spray of liquid instead of just air coming out. I've read that this chemical can damage the paint on figures, which is why I only dip them in water these days.
  #194002

Drego
Neko fanboy
Regular Boarder

Drego

En ligne Non
Niveau 13
Inscrit(e) Il y a 7 ans
Message(s) 34
Localisation France, C...

Il y a 7 ans
raetehytanIf you don't hold the can at a 90 degree angle, you'll see a spray of liquid instead of just air coming out. I've read that this chemical can damage the paint on figures, which is why I only dip them in water these days.

Agreed !

I usually wash figures with clear water ... but when i don't have much time for household or when doing general dusting i use those air compressed cans things.

As raetehytan saiz, if you reverse the can and press the button ... then BOOM ! ... nevermind ...

But if you do this, instead of compressed air you obtain very cold water spray ... which surely is a good self defense system in the street but not good for the safety of your figures ... :D
MàJ Il y a 7 ans #196614

Melody
Regular Boarder

Melody

En ligne Non
Niveau 14
Inscrit(e) Il y a 8 ans
Message(s) 150
Localisation United St...

Il y a 7 ans
I take a brush and dust it off XD
  #196864

cioudrunnerfiute
Found Holy Grail & Quit
Very Important Boarder

cioudrunnerfiute

En ligne Non
Niveau 18
Inscrit(e) Il y a 8 ans
Message(s) 396
Localisation Houston, ...

Il y a 7 ans
This may sound bad but I literally use Windex on my figures. So far it hasn't hurt them and since I'm not currently living in a smoke free home it gets them clean. I never scrub them (with anything) though because that's what takes paint off from my experience.

When I bathe them I have a few steps:

1. Dust off with a swiffer duster thing.
2. Rinse with lukewarm water.
3. Windex and let sit for 15 seconds.
4. Rinse off with cold water.
5. Let dry under a fan and on top of a towel.
http://i59.photobucket.com/albums/g316/Rem_Seibrem/aliciabeach-1.jpg
  #201872

PDackers
Regular Boarder

PDackers

En ligne Non
Niveau 9
Inscrit(e) Il y a 6 ans
Message(s) 1
Localisation Nederland

Il y a 6 ans
I know this topic is quite old, and I apologize for that. But I just wanted to say 'thanks' for all the great tips I've read here. I bought a 2nd hand figure which was a little dirty and I didn't know if I could use plain water to clean her. Reading through this topic I thought 'others had success, so why not try it' and now she's all clean again.

I do want to add the fact I use compressed air cans all the time and they work wonders. Never had any trouble with them. Just don't press the button to hard when dealing with fragile figures. (Out of safety).
  #608444

Stalking
Loli hunter
Regular Boarder

Stalking

En ligne Non
Niveau 27
Inscrit(e) Il y a 6 ans
Message(s) 102
Localisation Tokyo, Ja...

Il y a 6 ans
Wow, I might try compressed air cans some time...
Thanks for all the tips!

I usually sit and spend a whole afternoon cleaning them with a clean piece of cloth and cotton swabs, but some of my oldest figures are getting quite dirty, so I might as well try water <:
http://fc01.deviantart.net/fs71/f/2011/034/0/9/figure_collecting_stamp_by_aguzzla22-d38qo0j.pnghttp://fc01.deviantart.net/fs70/f/2011/186/d/8/stamp__pantsu_shot_by_aguzzla22-d3l50e3.gifhttp://fc01.deviantart.net/fs70/f/2011/186/0/e/stamp__sukumizu_by_aguzzla22-d3l4xma.gif
3DS FC 1478-5579-4340
PM me yours~!
  #612598

RaditzFan
Ultimate Raditz Fan
Regular Boarder

RaditzFan

En ligne Non
Niveau 14
Inscrit(e) Il y a 6 ans
Message(s) 158
Localisation USA

Il y a 6 ans
I usually just dust with a clean cloth on my figures. When I recieve really dirty or extremely dusty figures, I use very little scent free dish soap mixed with cold water. Then a rinse to clear all soap and let them air dry. That method works great for me.:)
MàJ Il y a 6 ans #612653

mizunoyukino
Regular Boarder

mizunoyukino

En ligne Non
Niveau 15
Inscrit(e) Il y a 6 ans
Message(s) 5
Localisation Singapore

Il y a 6 ans
I have a problem with my Nendo Miku and really need help.
She's really sticky/oily.
I've tried the freezing method and also washing it with just water, but it doesn't seem to help at all.
  #639408

akomei
Regular Boarder

akomei

En ligne Non
Niveau 16
Inscrit(e) Il y a 6 ans
Message(s) 125

Il y a 6 ans
mizunoyukinoI have a problem with my Nendo Miku and really need help.
She's really sticky/oily.
I've tried the freezing method and also washing it with just water, but it doesn't seem to help at all.


Does the freezing method apply for figures that have joints as well? For Revoltech, Figma, Play Arts, MMS, etc.?
  #705380

Kuuga
Regular Boarder

Kuuga

En ligne Non
Niveau 27
Inscrit(e) Il y a 5 ans
Message(s) 22
Localisation Anywhere

Il y a 5 ans
mizunoyukinoI have a problem with my Nendo Miku and really need help.
She's really sticky/oily.
I've tried the freezing method and also washing it with just water, but it doesn't seem to help at all.


may be u can try this way

1. Flush with flowing water.
2. scrub with a toothbrush that has been soaked with dish soap with clean good quality
3. clean the rest of soap with flowing water again
4. then dry with a towel or hair dryer.

Believe me, It's work on me.
MàJ Il y a 5 ans #904316

iTheShirt
Seasonally Otaku'd
Regular Boarder

iTheShirt

En ligne Non
Niveau 25
Inscrit(e) Il y a 5 ans
Message(s) 67
Localisation New York,...

Il y a 5 ans
I'm extremely new to being an owner of scaled figures. I got my Momohime figure a few weeks ago. I took it out a few times and left it out in my room for about a day before I felt the need to box it back up and leave it alone.

My room conditions are:
1. Cool draft/Cool spring morning temperature with the window open.
2. Window Closed = warm room temperature due to Xbox Elite and Computer always on.

3. Dimmed sunlight from blinds in window. Also there is an overhead fan with a common light bulb in it.
4. There is a furnace in my room that turns on occasionally.

Is it safe to leave my figures out in the open on my bookshelf? I heard they need to "breathe". Should I buy a case? Please give me some advice on how to take care of them. Thanks to this thread, I now know how to clean them and maintain their luster. But not how to safeguard them from the environment. (sorry if this is off-topic; I don't know where to go to ask)
http://i101.photobucket.com/albums/m72/Le-kun/thumbnail_f02ccb2e57841c86df01f5fa3e3cb59ecbf5fb5f_zpsc9e7284a.jpghttp://i101.photobucket.com/albums/m72/Le-kun/thumbnail_a21ac761a00c2373a6db5a93e67306fb_zps7340e4d7.jpg
http://myfigurecollection.net/profile/iTheShirt/sign.png
  #907200

iTheShirt
Seasonally Otaku'd
Regular Boarder

iTheShirt

En ligne Non
Niveau 25
Inscrit(e) Il y a 5 ans
Message(s) 67
Localisation New York,...

Il y a 5 ans
I own a Kanu Uncho figure that seems to always stick to the base within an hour of setting on it. Does this mean the figure is "oily". Should I dip it in water (warm? cold?) and then let it air dry? Mind you, I don't have the money for the Air Cans.. (Would rather put that towards another figure from my wishlist. haha)

Here's the link to the figure I'm talking about.
item #148
http://i101.photobucket.com/albums/m72/Le-kun/thumbnail_f02ccb2e57841c86df01f5fa3e3cb59ecbf5fb5f_zpsc9e7284a.jpghttp://i101.photobucket.com/albums/m72/Le-kun/thumbnail_a21ac761a00c2373a6db5a93e67306fb_zps7340e4d7.jpg
http://myfigurecollection.net/profile/iTheShirt/sign.png
  #907213

youth
Regular Boarder

youth

En ligne Non
Niveau 7
Inscrit(e) Il y a 6 ans
Message(s) 16

Il y a 5 ans
iTheShirtI own a Kanu Uncho figure that seems to always stick to the base within an hour of setting on it. Does this mean the figure is "oily". Should I dip it in water (warm? cold?) and then let it air dry? Mind you, I don't have the money for the Air Cans.. (Would rather put that towards another figure from my wishlist. haha)

Here's the link to the figure I'm talking about.
item #148


I have that figure & just checked her & while the she was stuck to the base she did not exhibit the sticky/oily issue so I think you are fine. Your figure is leaching potentially dangerous PVC plasticizers if you can feel the oily stickyness on it's surface. You can also see a glossy sheen if you shine a light on it. It's a very annoying issue because these figures aren't cheap.

I actually emailed Amiami about this & here's their advice.

"Once the figures have gotten oily like that, the best you can do without damaging them is to clean them using water and a very mild detergent. We suggest using a soft cloth rather than paper towel to avoid the paper sticking to the figure.

Another pointer to avoid this from happening is to remove figures from their box as soon as possible and put them in a well ventilated area for a few days. In front of a fan would be ideal, although maybe not the most practical. The chemicals get trapped in the sealed package and rather than protect your figures the box winds up doing them much more harm.
"
  #907270

« Préc.   1 2   Suiv. »

Haut ↑

Rejoignez le club pour prendre part à la discussion.