Loading
sugarsongsugarsongIl y a 10 mois
I have two figures with broken pegs that snapped off into their feet...the figures still stand with their first peg but does anyone have any suggestions to fix these snapped off pegs?
https://i.postimg.cc/gkgc0Qws/m72827103652-2.jpg
1,370 vues • 0 favori6 commentaires

Commentaires6

SkaylerOtakuCatIl y a 10 mois#66988531
I suggest that you heat up a needle on under a lighter. 10 seconds are enough. And the fastly stick it IN the broken peg


That needle trick is actually pretty brilliant. Wish I would have thought of that when the peg broke on one of mine.

Used a similar method fixing my bumper with a heat gun. Made the plastic malleable enough to push a dent out, like nothing ever happened.
Il y a 9 mois
It's actually quite easy!
1. You need to remove broken peg from figures foot
I suggest that you heat up a needle on under a lighter. 10 seconds are enuigh. And the fastly stick it IN the broken beg that is in the figure's foot (not in the actual figure!) About 3 milimiers deep is enuigh! Then dip the whole foot with the nidle in it into cold water. After that, try to gently wigle the peg out holding the nidle. Do not pul to fast or the needle will just go out from the peg. You need like a minute to whigle it out. When it's all out, just pull the nedle out with alot of force and glue the peg pack on it's place with really strog glue.
Il y a 10 mois
It's definitely a scary thing when our lovely ladies seem to break, but this one is a surprisingly easy and painless fix! Depending on how big the broken peg is you can just use a pin vice to drill it out. After that drill a hole going through the base where the peg should be, stick a metal rod into the foot/base, and just use some super glue/cement/etc to hold it all in place. If you've never done anything like that before, don't worry. It sounds infinitely more scary and destructive than it actually is. Just take your time and you'll have it fixed in a jippy.

FullmetalpiggyIl y a 10 mois#66864769Got the same issue with ITEM #259312
His front peg broke and got stuck in his foot and now he's leaning. :(
Following this post so I hope I will find an answer!

You can use this fix too! It's a pretty universal fix that'll work in most situations.
Il y a 10 mois
You should probably remove the peg in the foot. Use a pin vise to make a little hole, stick a needle or something similar inside with glue and pull it out. I would then suggest drilling/making the hole in the other piece on the base and using the needle as support between the two pieces while also adding glue to make them stick together. Superglue/cyanoacrylate obviously. Just a little bit though, be careful. The needle or metal rod if you want something thicker, will make sure it doesn't break again. Many don't seem to agree, but I usually use a different method too: heating up the needle (bright red) and sticking it in the plastic so that when it melts it stays stuck and you can pull the peg out that way, no drilling or glue, and also faster in my opinion...
Il y a 10 mois
Got the same issue with ITEM #259312
His front peg broke and got stuck in his foot and now he's leaning. :(
Following this post so I hope I will find an answer!
Il y a 10 mois
I've had the same problem. It seems to happen with the older figures. I use clear "Gorilla" glue. Just add a dab, hold in place for a few seconds and let dry.
Good luck.
Il y a 10 mois
Exclusive anime goods from Japan!

À propos de ce blog

Plus par sugarsong+

Items Liés

Tags0

Clubs Liés